Products

Polystyrol Adhesive Foam

HAOHAI Polystyrol Adhesive Foam is for fixing insulation boards on facades and foundations and fixation of interior design boards to walls. The adhesive is easier, faster and cheaper compared to the traditional gluing of facade boards and the modern fastening with foam adhesive.

Very good adhesive and sealing properties.

Adheres well to various materials, including foam polystyrene and mineral substrates. Very economical, saves time and money.

Even and strong structure, sufficient elasticity.

Low post-expansion allows fast and accurate adhesion.

High-quality result under various weather conditons.

Applications:

Can temperature during application between +5°C and +35°C, best work at +20°C.

Air temperature during application between -5°C and +35°C, best work at +20°C.

The surfaces to be joined must be free of dust, loose particles and oil.

High-quality result under various weather conditons.

Yield considerably depends on working conditions-temperature air humidity, expansion room.

Technical Specification (at +23°C and 50% relative humidity)

Tack free time: 10-12 minutes

Cutting time (30mm bead): 30-40 minutes

Completely cured in joint at +23°C: 9-11 hours

Completely cured in joint at +5°C: 12-16hours

Density: ≤30kg/m3

Fire class of cured foam:B2/B3

Flash point of cured adhesive: 400°C

Thermal conductivity≤ 0.040W/m.K

Temperature resistance of cured foam: Long term -50°Cto +90°C

Short term: -65°C to +130°C

Storage:

Store in a cool, dry place, at a temperature between +5°C and +30°C. The can must not be kept in temperatures exceeding +50°C, close to heat sources or in direct sunlight. 9 months in an unopened package.